When you hire commercial painters in Sydney one of the
things you appreciate about their work is their clean finishing around the
edges and trims. You wonder how the professional painters in Sydney can achieve
such outputs. The first real factor is their experience. They are professional
painters and perform the painting jobs day in and day, and you on the other
hand may touch the brush once in a blue moon. But the good news is that you too
can provide clean finishes around the edges and trims with a little read
through this post.
Step
1
If you paint the areas around the corners with a simple
brush then there is a high probability two different shades will be appearing in
the surrounding area. If you want to negate this effect then you should use a
roller to roll out the paint evenly. All you need is a 3 inch roller and a nap
of same thickness. Use your roller through the entire wall or area. The
experienced strata painters
in Sydney try to get as close to the wall without spilling the paint to
the next wall.
Step
2
When you are painting extra tall walls or stairwell it is
not possible to complete the painting in one stroke. So there are bound to be
stroke marks. Commercial
painters in Sydney feather the stroke marks. The thin feather coat
helps even out the paint and there are no stroke marks visible on the wall. If
the wall is really large, you should use rollers to dry out a wall before
moving to the next one. When you apply a second coat to the walls make sure
they are in the opposite direction. The crisscross movement of your brush
negates the marks.
Step
3
When you are painting a wall with some existing it is
important to sand the wall well. A single coat of paint cannot overshadow the
shade laying beneath. The professional painters in Sydney understand the type
of sand paper to use. Variety of sand paper also varies from one job to the
other.
If you want perfect finish for your office or apartment’s
walls then you should definitely contact reputable strata painters in Sydney.
